HVAC Tune Up Service

During the year, your HVAC system accumulates dust and dirt, making it less efficient and costing you additional money in utility bills. After reviewing our HVAC service calls from last year, we discovered that a lot of these calls were due to a problem caused by lack of regular HVAC tune-ups and maintenance. That’s why Mr. Central has developed a comprehensive 21-point Precision HVAC Tune-Up and Professional Heating System Cleaning…and we are offering it at an unbeatable price of only $89*!

*Oil Furnaces: Call For A Quote

 

Why is Mr. Central Making This Special Offer…and Why Should You Take Advantage NOW?

THREE REASONS.

ONE: This is a great way for us to introduce homeowners in Aiken, North Augusta, Augusta, Evans to our unbeatable fast, clean and professional HVAC services.

TWO: Industry experts are forecasting that energy prices are going to skyrocket in the months ahead. Electric and gas rates have already risen this year and are expected to continue to rise in the future. A precision tune-up and cleaning helps your furnace run more efficiently and use less energy…saving you money.

THREE: This special offer is the best thing you can do to prevent costly furnace and HVAC system breakdowns BEFORE they occur and to assure that your heating system is performing at peak efficiency throughout the winter and into next season.

So for a limited time, not only will you get a thorough tune-up of your HVAC system, you’ll have it performed by a seasoned Mr. Central HVAC and furnace professional. It’s the smartest thing you can do to guarantee a warm, worry-free, energy-efficient home during the winter ahead!

This 21-Point Precision Tune-Up

Your Mr. Central HVAC technician will perform a complete 21-step precision tune-up and professional cleaning of your furnace or heating system that will take nearly one hour to complete. It’s like having your furnace rejuvenated to factory fresh condition!

Electric or Gas Furnace 21-Point Precision Tune-Up – $89

  1. Camera inspection of furnace and heat exchanger
  2. Test airflow for deadly carbon monoxide
  3. Test ignition system for safe and proper operation
  4. Test safety and control circuits for proper operation
  5. Test exhaust system for proper venting
  6. Lubricate and clean blower motor air vents
  7. Measure temperature differences – supply and return
  8. Inspect and adjust fan belt tension (if applicable)
  9. Calibrate and level thermostat
  10. Inspect for combustible materials around furnace
  11. Brush, clean and vacuum burner
  12. Brush, clean and vacuum heat exchanger
  13. Test furnace flame for proper burn mechanism
  14. Clean or replace up to a 1″ filter
  15. Measure and adjust gas pressure for peak efficiency
  16. Lubricate all moving parts per manufacturer
  17. Measure amperage and voltage of blower motor
  18. Tighten and inspect all electrical wiring
  19. Clean upper and lower combustion vents
  20. Test for natural gas leaks
  21. Clean furnace exterior

Gas Boiler 24-Point Precision Tune-Up – $89

  1. Cycle boiler from thermostat to verify unit is functioning
  2. Inspect system for general problems (water leakage, burnt wires, physical damage)
  3. Verify appropriate supply of combustion air to boiler system
  4. Inspect boiler circuits for presence of air in piping
  5. Check for accumulation of dirt or rust on vent piping or draft hood. Also verify there are no holes, sagging of pipe, or signs of damage
  6. Ensure flue is sealed at chimney base
  7. Check boiler pressurization and add or remove pressure if needed
  8. Check condition and operation of all air elimination devices
  9. Check and test boiler high limit aquastat control & settings
  10. Drain expansion test (if applicable)
  11. Inspect expansion tanks for evidence of leakage or air infiltration
  12. If expansion tank is “diaphragm” type, check for proper pressurization
  13. Ensure that the safety relief valve pipe is 6” above the floor and that there are no leaks present
  14. Check and document flue draft readings using a draft meter
  15. Test low water cut-off devices for proper operation (if applicable)
  16. Test operation of any and all safety devices
  17. Complete a comprehensive combustion analysis and document all readings
  18. Check for appropriate gas pressure both from the meter and to the manifold
  19. Verify there are no gas leaks on piping with a leak detection solution and/or electronic leak detector
  20. Verify proper operation of all circulator pumps, zone valves, and relays
  21. Check and inspect flame ignition and proving circuits
  22. Oil/lubricate motors or pumps (if applicable)
  23. Test for proper voltage to the boiler
  24. Verify integrity of all wiring/electrical connections

Oil Furnace or Oil Boiler 21-Point Precision Tune-Up – Call For A Quote

  1. Disconnect and inspect flue piping from unit
  2. Sweep out accessible soot & vacuum from equipment
  3. Brush and vacuum flue pipe
  4. Clean area around the burner
  5. Remove and replace oil filter
  6. Remove and replace pump strainer, if applicable
  7. Replace oil nozzle with OEM specified replacement
  8. Clean & inspect electrodes for damage & cracks in the porcelain body
  9. Set electrode spacing to OEM specifications
  10. Clean the combustion head of all soot and debris
  11. Remove and clean flame detection device (CAD Cell)
  12. Inspect the ignition transformer & any associated wiring/electrical connections
  13. Clean the blower wheel and air control of any lint or debris
  14. Check all wiring for secure connections & overall integrity
  15. Inspect area for oil leaks
  16. Inspect all oil lines and fittings for leaks & secure connections
  17. Adjust burner to OEM specifications and/or industry standards
  18. Oil motors, if applicable
  19. Check for correct voltage supply to burner
  20. Complete a thorough & proper heat exchanger safety inspection
  21. Perform a thorough & accurate combustion analysis & make any necessary adjustments to ensure optimum performance & efficiency

60 minutes is all it takes to be assured of worry-free heater operation the rest of the winter!

VIP Maintenance Plans

Regular service of your Heating and Air Conditioning System can save you thousands of dollars over the long haul in energy costs. In fact, as much as $600 per year! Regular service extends the life of your system. Your membership will virtually pay for itself year after year. We have a maintenance plan for every system and budget.

Learn more »

Schedule Your Heating System Appointment!

Mr. Central serves Aiken, North Augusta, Augusta, Evans and the surrounding CSRA, with 24 hour emergency service. Our service vehicles are located throughout the CSRA, so we are always nearby.

Schedule Service - Click for Real Time System

SCHEDULE AN APPOINTMENT